Tanyakan stok dan harga di distributor resmi
EMLID INDONESIA
Hubungi: 0812-2652-2324 (satria)
Specification:
Mechanical
- Dimensions126 x 126 x 142 mm
- Weight950 g
- Operating temperature-20 to +65 ºC
- Ingress protectionIP67
Electrical
- Autonomy18 hrs as an RTK rover with tilt
22 hrs of logging - BatteryLi-Ion 5200 mAh, 7.2
V37.44 Wh - ChargingUSB Type-C 5 V, 3 A
Positioning
- StaticH: 4 mm + 0.5 ppm
V: 8 mm + 1 ppm - PPKH: 5 mm + 0.5 ppm
V: 10 mm + 1 ppm - RTKH: 7 mm + 1 ppm
V: 14 mm + 1 ppm - TiltRTK + 2 mm + 0.3 mm/°
- Convergence time~5 s typically
Connectivity
- RadioLoRa
Frequency range
Power
DistanceTransmit and receive
868/915 MHz
0.1 W
Up to 8 kmUHF*
Frequency range
Protocols
Modulation typeReceive-only
410–470 MHz
TRIMTALK 450S**
GMSK - LTE modemRegions
BandsGlobal
FDD-LTE: 1, 2, 3, 4, 5,
7, 8, 12, 13,
18, 19, 20, 26, 28, 66
TD-LTE: 38, 40, 41
UMTS (WCDMA/FDD):
1, 3, 2, 4, 5, 6, 8, 19
Quad-band, 850/1900
900/1800 MHzSIM cardNano-SIM - Wi-Fi802.11 b/g/n
- Bluetooth4.0/2.1 EDR
- PortsRS-232, USB Type-C
- *Requires a 410-470 MHz antenna, sold separately.**TRIMTALK is a trademark of Trimble Inc.
Data
- CorrectionsNTRIP, RTCM3
- Position outputNMEA, LLH/XYZ
- Data loggingRINEX, NMEA, LLH/XYZ, UBX
- Internal storage16 GB
GNSS
- Signal trackedGPS/QZSS L1C/A, L2C,
GLONASS L1OF, L2OF,
BeiDou B1I, B2I, Galileo
E1B/C, E5b - Number of channels184
- Update ratesup to 10 Hz
- IMU6DOF
Accurate results even with large tilt angles
The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy.
Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.
Survey and stakeout faster
No need to check the bubble
Effortless and robust
Tilt compensation
Calibration-free
We calibrate each unit individually at the factory, so you can get your Reach RS3 up and running right out of the box.
Immune to magnetic disturbances
Unaffected by magnetic fields, the RS3 provides robust tilt compensation even when working close to metal structures.
Quick initialization
Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.
Rapid and Reliable GNSS receiver
Get corrections from CORS, Reach,
or 3rd-party base
NTRIP
Base and Rover
Work in RTK with VRS or a single baseline CORS network. You
can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster.
Compatibility
Any receiver with RTCM3 support
Dual-band radio
LoRa 868/915 MHz
Base and Rover
Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.
CompatibilityAll Emlid receivers
with built-in radio
UHF 450 MHz
Rover
An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.
CompatibilityBases with radios that
transmit TRIMTALK 450S**
*Requires a 410-470 MHz
antenna, sold separately
**TRIMTALK is a trademark
of Trimble Inc.
Comes with software
for the field and the office
Emlid Flow efficiently manages all field-related tasks, including receiver configuration, RINEX logging, data collection, and stakeout.
The basic features are available for free to all users. Upgrade your Emlid Flow and Flow 360 with a single subscription.
Tilt CompensationLocalizationCodingData collection and stakeoutBase shiftBase and rover setupBackground mapsLoggingCSV, DXF, SHP export and importSync up to 3 devicesRugged
and compact
126 x 126 x 142 mm
950 g
IP67
RS3 is waterproof up to a one meter depth. Silicone plugs completely seal and protect all connectors from water and dust.
Industrial battery
The Reach RS3 Li-Ion battery handles high and low temperatures well and over 2000 cycles of charging and discharging while maintaining its original capacity.
While others are hot-swapping batteries, your Reach just keeps working.
-20 to +65 ºС
We extensively tested Reach RS3 in conditions that simulate the coldest winters and hottest summers.
Impact-resistant
The body of the Reach RS3 is made of polycarbonate and coated with elastomer. The combination of these materials makes your Reach RS3 drop resistant and ready for the harshest conditions.
User reviews
In the package
Reach RS3
LoRa antenna
USB cable
Carrying case with a strap
Need help?
Tutorials
Watch quickstart guides and comprehensive feature overviews.
Emlid support team regularly updates all materials based on the most frequently asked questions and popular workflows.
Community
Join the Forum and Facebook User Group to get in touch with the Emlid team, get tips and advice, and connect with Emlid users from around the world.
Reach RS3 in the Emlid Store
Reach RS3 kit
2 x Reach RS3
2 x USB cable
2 x LoRa antenna
2 x Carrying case with a strap
3 x months of Emlid Flow
